|
The norms set by it for the discharge of its function
: |
| |
- The Infrasturcture
works such as road ,drains parks, electrification, park beautification
are completed as per P.W.D Schedule and specification
.
- The Maps of residential
/ commercial buildings are sanctioned as per building by- laws which
are given below:-
For the sanction of building plans, and application from accompanied
with four maps shall be submitted to the Authority through the License
holder
Architect/Engineer/Draftsman.
For plot area below 100 sq.mt. In 80 years or old areas, there
is no need to get sanction for maps. However the construction work
shall be carried
out according to relevance by Laws.
For residential building of plot area above 100 sq.mt. and below
300 sq.mt., the building plan shall be prepared according to Authority
by
laws and
shall by duly signed and certified by a member of council of Architecture.
It shall be submitted and charges like plan fee, betterment/development
charges, stacking charges & supervision charges will be paid.
In such cases there will be no have formal sanction. In other case
pre-sanction
of plans is required.
Rates of Charges–
|
- Development
Charges :
Muzaffarnagar, Shamli and Khatauli: Rs. 130 per sq.
mt. on plot area
in developed areas.
Budhana, Kandhla and Kairana: Rs. 80
per sq. mt. on plot
area in developed areas.
Shukrataal: Rs.
50 per sq. mt. on
on plot area
in developed areas.
- Betterment
Charges :
Muzaffarnagar, Shamli and Khatauli, Budhana, Kandhla and Kairana:
Rs.60
per sq. mt.on
covered areas in built up areas. (In
Residential) Rs.120
per sq. mt. on
covered areas in built up areas.(In
Commercial)
Shukrataal: Rs.32.28
per sq. mt. (In Residential) Rs48.24
per sq. mt. (In Commercial)
- Stacking
Charges : Rs. 13..50 per sq.mt. on total covered area.
- *Supervision
Charges : Rs. 5 per sq.mt. on total covered area.
* Not applicable on plot areas below 100 sq.mt.
|
| |
The
front , rear and side setbacks (i.e. open spaces) & the ground
floor areas to be built over for difference categories of plots, in residential
areas, shall be as per table given below :- |
| |
PLOT AREA
|
G.F.Cov.
AREA |
FAR |
FRONT SETBACK |
REAR SETBACK |
SIDE SETBACK
I II |
| Upto 50 M2 |
75% |
2.00 |
1.0m. |
- |
- |
| 51 to 100
M2 |
75% |
2.00 |
1.5m. |
1.5m. |
- |
| 101 to 150
M2 |
65% |
1.75 |
2.0m. |
2.0m. |
- |
| 151 to
300 M2 |
65% |
1.75 |
3.0m. |
3.0m. |
- |
| 301 to 500
M2 |
55% |
1.50 |
4.5m. |
4.5m. |
3m. - |
More than
to 500 M2
|
45% |
1.25 |
6.0m. |
6.0m. |
3m. 1.5m. |
|
| |
| In Rear setback, on 40% of rear open space (upto 7 m. high) construction
is permissible. |
| |
MINIMUM SIZES
OF DIFFERENCE UNITS IN A RESIDENTIAL BUILDING –
-
The
sizes of the living room shall not be less than 9.5 sq.mt.& the
shorter dimension shall not be less than 2.4 M. Celling height
shall not be less than 2.75 M.
-
Kitchen
:- 5 M2 & shorter dimension shall not be less than 1.8
M.
-
Latrine
(W.C.) :- 1.1 M2 & shorter dimension shall
not be less than 1.8M.
-
Bath Room :- Min.Size
1.5 M2 , Min. Width 1.0M.
-
Toilet :- Min.Size
of area 2.8 M2 , Min Width is 1.2M.
|
